How to Install Body Lift Kits

You can install a body lift by yourself using simple tools.

You can raise the height of the body on your vehicle by installing a body lift. A body lift consists of nylon pucks that are installed between the frame of the vehicle and the body. Lifts come in a variety of sizes from 3/4-inch to 3-inch. They can be purchased online or at any off-road store. After installing a body lift, you will be able to install larger tires and rims to increase your vehicle's ground clearance.

Things You'll Need

• Penetrating fluid
• Ratchet
• Socket set
• Hydraulic jack
• Block of wood

Instructions

1. Locate the body mounting points on your vehicle by looking under the vehicle. The body mount has a bolt that attaches the body to the frame. The number of body mounts will vary, depending on your vehicle.

2. Spray each bolt liberally with penetrating fluid.

3. Loosen and remove each bolt with a ratchet and socket.

4. Place a hydraulic jack next to the vehicle. Place the jack on a block of wood so that you are able to lift the body of the vehicle.

5. Lift the body enough to install nylon spacers between the factory bushings on the frame and the body, before lowering the body onto the nylon spacers.

6. Install the new bolts that came with the body lift kit and tighten them with a ratchet and socket. Continue until each bolt has been installed and tightened.

7. Drive the vehicle for 500 miles. Re-tighten the bolts with a ratchet and socket.

Tips & Warnings

• Use caution when lifting the body of the vehicle.

References

• 4x4Wire: YJ 1" Body Lift