How to Add Prestige Alarm Remotes

Prestige alarm remotes can be synced from your driver's seat.

Alarm systems are popular on cars around the world. These systems offer a different level of security and convenience for your vehicle, and you can reprogram your remote in just minutes from your driver's seat. Programming requires only the remote itself and your ignition key. The remote is ready to use immediately after programming to control your alarm, as well as your door locks. Prestige alarms can be programmed to your car with a remote, along with remote starting and keyless entry.

Instructions

1. Enter your car and turn the key in your ignition to the "On" position.

2. Switch the valet switch on your alarm transmitter "On" and then "Off' three times in quick succession.

3. Wait for the alarm system to chirp and press the button on the remote that you would like to program to your system.

4. Hold the button until the alarm chirps again and move the valet switch "On" and "Off" again.

5. Wait for the siren to chirp again and remove your key from the ignition to end the sequence.

References

• Manuals Online: Prestige Transmitter Programming Guide