How to Know When a Car Relay Is Bad

by Richard Asmus
itstillruns article image
12 volt relais, relay image by Sascha Zlatkov from Fotolia.com

Whenever you operate a switch to an accessory in your car that carries a lot of current--such as the lights, wipers or horn--you run a small amount of current through a relay which, in turn, closes contacts to operate the accessory. If one of your accessories doesn't come on and you suspect the relay is bad, you can perform a few simple tests. Look for the location of your relay in your owner's manual or in the fuse panel inside the car or under the hood.

Step 1

Open the hood and/or fuse compartment so that your assistant can access the relay.

Step 2

Turn the key to the "Accessories" position and instruct your friend to touch the relay while you operate the switch for the accessory that isn't working. Your friend should feel a click in the relay when it operates. If not, you have a bad relay.

Step 3

Pull the relay out of its socket with the ignition off and insert a short piece of wire into the two connections of the relay that make contact when the electromagnetic coil pulls them together. Look on the relay for a diagram of the pins. They should be the ones labeled "Common" (C) and "Normally Open" (NO). On a standard Bosch automotive relay, the pins are 30 and 87.

Step 4

Operate the switch again to see if the accessory works. If it now works, the relay is bad.

More Articles

article divider
×