2007 Honda CR-V Micron Filter Installation
The micron filter in the 2007 Honda CR-V filters the air that goes through the air conditioning system. This filter is also referred to as an air conditioning or cabin air filter. Honda recommends replacing this filter every 15,000 miles or once a year. If the CR-V is frequently driven in areas with a high amount of air pollution, the filter should be checked more often and replaced when it becomes dirty. A clean micron filter improves the air circulation in the ventilation system as well.
Instructions
-
-
1
Open the glove compartment.
-
2
Pull the tension rod on the right side of the glove compartment away from its hook to disconnect it.
-
-
3
Push in on the side walls of the open glove compartment to unhook it from the dash. Pivot the glove compartment down to expose the area behind it.
-
4
Pull the filter frame towards the rear of the CR-V to remove it from the dash.
-
5
Lift the old filter out of the filter frame.
-
6
Place the new filter into the filter frame. Press around the edges of the filter to make it go under the tabs on the frame.
-
7
Slide the filter frame into the dash.
-
8
Lift up on the glove compartment. Hook the tension rod back into place on the right side.
-
1
References
- Photo Credit Jupiterimages/Photos.com/Getty Images