The fan belt on the 1995 Nissan Pickup is a V-belt that also operates the alternator. The belt is driven around the fan pulley and the alternator pulley by the crankshaft while the engine runs. As the belt circles the accessory pulleys, it enables the fan to keep the radiator cool and the alternator to supply the proper amount of voltage to the battery. Over time, the belt chafes and cracks, so replace it promptly.
Things You'll Need
- 1/2-inch drive ratchet
- Metric socket set
- New fan belt
Open the hood and locate the alternator on the front left-hand side of the engine. The alternator has an adjustment bracket on top of it that keeps the belt inside of the alternator pulley and the fan pulley.
Loosen the lock bolt in the middle of the alternator bracket with the ratchet and a socket.
Turn the adjustment bolt on the end of the alternator bracket counterclockwise with the ratchet and socket to loosen the belt from both accessory pulleys. Pull the belt out of both pulleys and out from around the crankshaft pulley. Pull the belt out of the engine compartment.
Slide the new belt around the fan pulley, alternator pulley and the crankshaft pulley. Tighten the belt by turning the adjustment bolt clockwise with the ratchet and socket. Check the tension of the belt by pushing inward on the belt with your hand. Make sure that the belt exhibits no more than 1/2-inch of slack.
Tighten the lock bolt in the middle of the adjustment bracket tightly with the ratchet and socket. Inspect the belt and make sure that it is situated inside all three pulleys.
Crank the Nissan for about 15 seconds to completely seat the new belt to all three pulleys. Turn off the engine and recheck the tension of the belt. Close the hood.
Tips & Warnings
- The belt tension can also be checked with a belt tension checking tool that can be found at most auto parts stores.
- Keep hands and tools away from moving parts while the engine is running.
- "; Nissan/Datsun Pick-up & Pathfinder Haynes Repair Manual for 1980 thru 1997 covering 2WD &4WD models with gasoline engines Pick-up (1980 thru 1997) Pathfinder (1987 thru 1995)"; John Haynes; 1998
- 2carpros: 1995 Nissan Pickup Belt Routing Diagram
How to Replace the Serpentine Belt in a Nissan Pathfinder
Nissan Pathfinder models generally have more than one belt, either two or three drive belts according to models and features. Nissan suggests...
How to Replace the Fan in a Nissan Pathfinder
Your Nissan Pathfinder most likely has a mechanical (belt-driven) fan. A novice should be able to accomplish these steps in about an...
How to Replace a Nissan Alternator
Nissan automobiles use an alternating generator to produce power for the battery, engine and accessories. This alternator can wear out and require...
How to Change the Alternator on a Hardbody Truck
The alternator in your Nissan Hardbody creates electricity from the drive belt of the engine, and transfers that energy to the electrical...
How to Change the Alternator on a 1997 Nissan SE Pickup
If your 1997 Nissan SE pickup will not start, your vehicle's alternator may be to blame. An alternator is a mechanical device...
How to Replace the Fan Belt in a Nissan Truck
Over the last century, the pickup truck has remained a fixture in American society. Almost every full-line automotive manufacturer has at least...
How to Change the Belts on a 1995 Nissan Pickup
The hard body Nissan pickups were built between 1986 and 1997. The 1995 Nissan Pickup comes equipped with two separate belts that...