How to Use Mr. Clean Magic Eraser With Liquid Cleaners
The Proctor & Gamble Mr. Clean Magic Eraser is a cleaning sponge made from BASF Basotect melamine resin foam--interlocking melamine resin strands that create a cell-like structure that becomes as hard as glass when moistened. The eraser cleans dirt and stains from surfaces by wearing at the substance just like a pencil eraser. The cells of the foam then collect and pull away the dirt or staining material. Manufacturers design liquid cleaners to help break up dirt and stains. As a result, using your Mr. Clean Magic Eraser with a liquid cleaner only requires that you pre-treat surfaces with cleaner before using the eraser. Does this Spark an idea?
Instructions
-
-
1
Fill a bucket with warm water.
-
2
Dunk your Mr. Clean Magic Eraser into the warm water. Squeeze out the excess water from the melamine resin foam.
-
-
3
Apply your liquid cleaner to the surface you need to clean. For example, spray an area with liquid spray cleaner or apply a bead of liquid cream cleaner to the dirt or stains.
-
4
Wait the amount of time the manufacturer of the cleaner recommends for the cleaning surface and type of dirt, stain or staining material.
-
5
Rub your damp Mr. Clean Magic Eraser firmly, but not harshly, side to side, back and forth and/or up and down across the dirty or stained area.
-
6
Rinse out the eraser in your bucket of warm water as it becomes dirty. Squeeze out the excess. Apply additional cleaner to your surface or to the eraser as needed to continue to clean.
-
7
Dispose of and replace the rinse water as needed while you clean. When you're finished cleaning an area, rinse the eraser thoroughly under warm running water and wipe any remaining cleaner residues or pieces of eraser from the surface. If you're working in a shower or sink, simply spray or rinse the area with running water.
-
1
Tips & Warnings
Always test your damp Mr. Clean Magic Eraser on an inconspicuous area of your cleaning surface prior to cleaning it to make sure you don't scratch the surface. Melamine resin foam is extremely hard at a microscopic level and can scratch surfaces easily.
Never clean a surface with a dry Mr. Clean Magic Eraser. The eraser will break apart. Additionally, use of high pressure or force while cleaning with a damp eraser can break up the foam.
