How to Repair the Track Bar on a Dodge Truck

You can replace the track bar in your Dodge Ram.

The track bar on your Dodge Ram is a commonly replaced part. Due to the faulty rubber bushings at each end, the track bar develops play in the steering. A common sign of a worn track bar is "death wobble." Death wobble occurs when the vehicle encounters a bump on the road and the steering wheel jolts back and forth until the vehicle comes to a stop. Replacement track bars can be purchased at any auto parts store.

Things You'll Need

• Ratchet
• Socket set

Instructions

1. Position the tires straight ahead with the steering wheel.

2. Locate the track bar under the vehicle. The track bar mounts to the axle on the passenger's side and the frame on the driver's side. There are bushings at each end.

3. Remove the bolts that secure the track bar in position using a ratchet and socket. Remove the track bar from the vehicle.

4. Place the new track bar into the mounting brackets. Install the bolts and tighten them using a ratchet and socket.

References

• Geno's Garage: Track Bar Ball Joint Diagnosis