How to Finish Wood With Walnut Oil


Walnut oil magnifies the beauty of wood furniture and flooring, while adding a protective finish. Unlike many finishes, walnut oil is all natural, which means it does not possess any toxic chemicals, although there is still a danger of nut allergies if food comes into contact with a walnut finish. Walnut oil finishes "in" the wood, rather than "on" the wood, like varnish, which means walnut oil does not form a layer on the wood. This prevents the finish from being chipped off and allows straight re-application without removal of the previous treatment.

  • Purchase a 100 percent walnut oil product if applying to a food preparation area. Some impure solutions may introduce potentially toxic chemicals, but pure walnut oil is non-toxic.

  • Apply liberal amounts of walnut oil over the area to be finished. Use a rag for small areas or a roller for large areas.

  • Allow the walnut oil to absorb into the wood for approximately 30 minutes.

  • Wipe off any remaining walnut oil, using a clean rag along the direction of the grain.

  • Repeat the procedure for a second coat, if desired. Walnut oil is non-curing, so one or two coats will be sufficient.

Tips & Warnings

  • You can also use a mixture of walnut oil and beeswax for a more protective, all-natural finish.
  • Walnut oil is derived from nuts, which means there is a danger of allergic reactions if used on food preparation surfaces. If you are allergic to nuts, use a mineral oil for any area that comes into contact with food.

Related Searches


Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!