How to Use Powdered Alum to Purify Water

Clean water is essential for all organisms on Earth.
••• Yagi Studio/Photodisc/Getty Images

Alum, also known as potassium aluminum sulfate, can be used to purify water. According to the Environmental Science Activities for the 21st Century Project, water purification is an essential sanitation measure taken to ensure drinking water is clean and safe. Novak and Watts point out that phosphorous is a common contaminant found in water supplies located near livestock shelter and grazing facilities. Alum in its powdered form can be added to water to bind with phosphorous particles to aid the water purification process.

    Pour eight-tenths of a gallon of contaminated water into the reaction vessel -- a sturdy glass container. Be sure that there is enough space in the vessel that the contaminated water can be stirred without spillage.

    Add 1.4 ounces of alum powder to the contaminated water in the reaction vessel and carefully stir the mixture with the stirring stick for at least five minutes. Sediment will form as the phosphorous in the water binds with the alum powder.

    Attach the liquid storage container intended to hold the purified water to the filtration apparatus. This container should be marked or labeled to distinguish the purified water it will hold from other containers that may contain contaminated water.

    Filter the water-alum mixture through a filtration apparatus. The filter will allow the purified water through while trapping the alum-phosphorous mixture. The purified water will collect in the liquid storage container and be used without fear of phosphorous contamination.

    Things You'll Need

    • eight tenths of a gallon contaminated water
    • Reaction vessel
    • 1.4 ounces powdered alum
    • Stir stick
    • Liquid storage container
    • Filtration apparatus

    Tips

    • Although alum serves to purify water of its phosphorous content, it is important to remember that purified water may need to be sterilized prior to consumption. Add a germ killing agent to the purified water to be sure it is fully disinfected.

    Warnings

    • Do not drink either the contaminated water or the water-alum mixture. Until the water is passed through a filter the phosphorous will remain present and can potentially be hazardous.

Related Articles

Hazards of Copper Sulfate
How to Make Silicon Crystals from Sand
How to Make 24K Gold
Uses of Alkali
What Is the Process of Water Treatment?
How to Make Skim Milk Agar Plates
How to Make Magnesium Chloride
How to Remove Bee Propolis Stains
Different Ways to Raise the pH of Drinking Water
How to Treat High Conductivity in Water
Potassium Permanganate Water Treatment
How to Make an Eyedropper Syringe
How to Dissolve Urea in Water
The Disadvantages of Ion Exchange
Commercial Uses of Sodium Polyacrylate
How to Use Propylene Glycol
What Is Anhydrous Methanol?
How to Make Homemade Glow Sticks
How to Dissolve EDTA in Water

Dont Go!

We Have More Great Sciencing Articles!