How to Install a Dish 322 Receiver

It is possible to view satellite programming on your television system.

Dish Network uses several different satellite dishes, including Dish 322. The receiver is standard definition and does not provide image resolution over 480p (high definition provides up to 1080p). However, the equipment does only takes a few minutes to hook up, allowing you more time to view your satellite programming. Make sure to activate your service with Dish Network before attempting to watch the programming.

Things You'll Need

• Component video cables
• RCA audio cables
• Access card

Instructions

1. Connect the coaxial cable running from the satellite dish into the "In" port on the Dish 322 receiver.

2. Plug the component video cables into the "Component Out" ports on the Dish 322 receiver. Connect the other ends of the cables into the "Component In" ports on the television.

3. Insert the RCA audio cables into the "Audio Out" ports on the Dish 322 receiver. Connect the free ends of the cables into the "Audio In" ports on the television.

4. Slide in the access card into the access port on the front on the receiver if the receiver did not come with it already inserted. Power on the receiver. Turn on the television and press the "Input" or "Video" button until you see the programming on the TV.

References

• DBS Install: Dish 322 Receiver Manual