How to Determine if a GFCI Outlet Is Bad


The National Electrical Code requires ground fault current interrupting (GFCI) outlets in bathrooms, kitchens, outdoors and anywhere else water is likely to be present. The breaker inside a GFCI outlet trips when it detects a sudden surge of current, such as would be caused by holding an ungrounded appliance while standing in water. GFCIs have two buttons in front, often colored red and black. The black button is for testing the outlet, while the red one is for resetting it in the event that it trips.

Things You'll Need

  • Screwdriver
  • Check the breaker controlling the circuit in which the GFCI is installed if the red button is out and won't stay in when you push it. Reset it if it is tripped and push the reset button on the GFCI again.

  • Unplug all appliances plugged into outlets downstream of the GFCI. Even though the outlets may not be GFCIs, a faulty appliance or a ground fault in an appliance plugged into one of them will prevent the GFCI from resetting.

  • Turn off the breaker to the circuit and unscrew the cover plate from the GFCI with a screwdriver. Unscrew the GFCI from the electrical box. Inspect the wire connections and verify that the live circuit is connected to the terminals marked "Line," usually the upper pair, and that the cable going to other outlets is connected to the "Load" terminals, usually the bottom pair. Correct the wiring if the cables are reversed.

  • Push the black test button if the red button is all the way in but there is no power to the GFCI or the outlets connected to it. The red button should pop out. If it doesn't, the GFCI is probably defective.

Related Searches


  • Photo Credit Jonathan Kantor/Lifesize/Getty Images
Promoted By Zergnet


You May Also Like

  • GFI: What Does it Mean?

    GFI stands for "ground fault interrupter." A GFI is required on electrical outlets where there are risks of shock or electrocution. GFIs...

  • How to Reset a GFCI Outlet

    Ground fault circuit interrupt, or GFCI, outlets are a safety device that break a circuit if a current imbalance occurs. They should...

  • How to Know If an Electrical Plug Is Bad

    Anything with a power cord can stop working, but the power source is not always what's at fault. For a complex piece...

  • How to Test GFCI Breakers

    A ground fault control interrupter (GFCI) is an electrical outlet with a built-in circuit breaker that is required equipment in key positions...

  • How to Locate a GFCI Receptacle

    GFCI circuits are electrical devices that protect people from electrical shock injury and electrocution. GFCI stands for Ground Fault Circuit Interrupter. These...

  • How to Reset Electrical Sockets

    Only a GFCI (ground fault circuit interrupter) electric outlet can be reset. This type of outlet increases electrical safety by lessening the...

  • The GFI Outlet Won't Reset

    National residential electrical codes mandate that a GFI, or ground fault interrupter, outlet be installed in any area where an appliance using...

  • How to Find a Defective Electrical Receptacle

    Receptacles or electrical outlets in your home provide power for various devices, such as lights and appliances. On rare occasions a receptacle...

  • Do I Need a GFCI Outlet in a Garage?

    Ground fault circuit interrupters are electrical outlets that trip a breaker in the outlet itself if the GFCI detects a short or...

  • Problems With Wiring a GFCI

    The National Electrical Code (NEC) requires ground fault circuit interrupt (GFCI) outlets in new construction for countertop and exterior outlets, as well...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!