A geothermal heat pump is an increasingly popular alternative to traditional heat systems, such as oil, gas and electric. A geothermal heat pump circulates water through a network of underground pipes. The water in the pipes is kept warm by the pressure of being so far underground and by the heat from Earth's core. The water passes through a compressor in your home, which pressurizes the water---heating it further---before circulating it through your home, and eventually back into the ground. Installing a geothermal heat system can be expensive, but it is likely to pay off in the long run versus the cost of oil heat.
Contact a geothermal heat system installer, preferably one in your area. This is a major job, not a do-it-yourself project. An installer also will help you evaluate the fitness of your home and land for geothermal heat.
Determine the feasibility of adding geothermal heat by examining the land and available water supply with your contractor. Your contractor will use this information to advise you on which type of system you should install.
Choose the type of heat pump system you want to install. Your options will depend on the soil, temperature and water conditions of your property. There are two main categories of heat pump systems: closed-loop and open-loop, and there are three types of closed-loop systems: horizontal, vertical and pond/lake.
All closed-loop systems circulate water through a closed network of underground or underwater pipes. In horizontal systems, the pipes are buried within a few feet of the surface. Horizontal systems are less expensive to install but require a large area and are not suitable for areas with heavy winters where the frost will reach the pipes. In vertical systems, the pipes are drilled vertically into the ground---about 100-400 feet deep. Vertical systems require less land and work well in heavy winters; however, they are often more expensive to install than horizontal systems. Pond/lake systems use coils of pipe in a body of water on your land. The pond or lake has to be deep enough so that the pipes will not freeze.
An open-loop system circulates an available water supply---such as well water---through the heat pump. Open-loop systems are only possible when there is an adequate supply of clean water.
Get an estimate from your contractor. Your contractor also should be able to tell you the estimated electrical costs of running the heat pump. Add up the installation costs and the cost of heating your home over a period of years and compare these to the cost of using your existing heating system. This will tell you how long it will take before you see a return on your investment by way of energy savings.
Apply for financing before inking a deal with the contractor. Many states offer tax incentives for homeowners installing geothermal heating systems.
- Photo Credit Don Smith/Photodisc/Getty Images
- How Much Does a Geothermal Heat Pump Cost?
How to Convert Heating Oil to Pounds
There are times when it is advisable to know how much your heating oil tank will weigh when it is full. Your...
How to Build a Geothermal Heat Pump
A geothermal heat pump works by passing water through underground soil. Because the soil temperature fluctuates less than the air temperature, geothermal...
How to Convert a Forced Air System to a Heat Pump
Changing from a traditional forced air heating system to a heat pump means replacing the furnace and upgrading the forced air ducts....
How to Convert Central AC to Heat Pump
A heat pump is a heating system that uses compression and expansion to transfer thermal energy from a cold environment to a...