Polaroid Inkjet Refill System Instructions
Polaroid Inkjet cartridges offer a much cheaper alternative for Hewlett-Packard and Epson printer models. Not only do these Polaroid cartridges cost significantly less than the HP and Epson versions, but they are also refillable, so you do not need to waste additional money replacing the cartridge when it runs dry. Refilling your printer's inkjet system does not require any sort of mechanical expertise and can be accomplished in a short amount of time.
Other People Are Reading
Instructions
-
Hewlett-Packard Cartridges
-
1
Use a flathead screwdriver to peel away the colored cap on top of the cartridge.
-
2
Use a drill to pierce through the small circular plastic caps on top of the fill holes.
-
-
3
Insert a toothpick into each hole to determine which type of ink is in the cartridge.
-
4
Fill your small syringe with one color ink, insert it into the hole and refill the compartment.
-
5
Replace the colored cap back onto the cartridge when finished.
Epson Cartridges
-
6
Use your drill to create a small hole near the top label, and then drill a second hole for air to release from the cartridge.
-
7
Fill your small syringe with one color ink, insert it into the hole and refill the compartment.
-
8
Reseal the hole with either tape or a mild adhesive.
-
1
