How to Troubleshoot My InSinkErator 333

Save

The Insinkerator Badger 333 is a garbage disposal system that installs under your kitchen sink. It also accepts dishwasher waste and has a dishwasher inlet. Insinkerator products ship with a wrench called a wrenchette. It's an important tool for troubleshooting because it's used to free a jammed motor. Problems with the Insinkerator Badger 333 can include odors and a jammed motor, which you can easily solve .

Things You'll Need

  • Wrenchette
  • Baking soda
  • Disposer cleaner
  • Tongs
  • Clean the Insinkerator Badger 333 disposer if odors come from the sink opening. Put the stopper in the opening and fill the sink halfway with warm water. Mix one-quarter cup of baking soda in the water. Turn the disposer on and release the stopper. The baking soda mixture will flush and clean the disposer.

  • Follow the same procedure with special disposer cleaner that's available from hardware stores if the baking soda solution fails to eliminate the odors. Follow the directions on the packaging for quantities and product-specific directions.

  • Free the motor if the Insinkerator jams and won't work. Turn the water and disposer off. Insert one end of the wrenchette into the center hole on the bottom of the disposer. Turn the wrenchette until you can make a full turn. You may have to work it back and forth.

  • Insert tongs into the disposer and remove the object that jammed the disposer.

  • Wait a few minutes for the Insinkerator Badger 333 disposer to cool down and press the red button next to the center hole that you worked with the wrenchette.

References

  • Photo Credit Tim Klein/Stockbyte/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!