You may get a dent in your car hood if an object falls on it or you sat on the hood and it bent. You can save a trip to the garage and money by solving the problem at home. With a few basic tools, you can repair your bent car hood without the need of professional assistance.
Things You'll Need
- Rubber-headed hammer
- Block of wood 20 inches by 10 inches by 3 inches
- Car paint matching your car's color
- Paint brush or sponge
Assess the damage. If the car hood has completely buckled, you may not be able to fix it unless you are a mechanic. However, if the hood is bent from daily wear and tear (from sitting on it, for example), you can hammer out minor dents.
Remove the hood of your car. Unscrew it from the hinges, which are usually located underneath the front windscreen. Refer to the car's manual if you are unsure about how to do this because each model of car is different. Get a friend to help because the hood may be heavy.
Place the hood upside down on the grass or an old piece of carpet to prevent scratching the paint while you repair the hood.
Use the hammer to knock the dents out of the car hood. Strike the hood with firm, steady hits directly on the bend or dent. Knock the dents out slowly. It is better to use several, gentler hits instead of one strong hit that may cause more damage to the hood.
Use the block of wood on areas with large dents. Place the wood on the area and hammer the wood, instead of directly hitting the car hood. The wooden block will spread the pressure out over a greater area and help fix the dent.
Repeat steps 4 and 5 until the bend has been removed or minimized to your satisfaction. Turn the hood over if you need to work at the bends from the opposite side.
Paint the damaged area, if necessary, with car paint that matches the original color of the car. Let it dry.
Replace the hood by screwing it back onto the hinges. Align the hood correctly with the grill so that it closes properly.
Tips & Warnings
- Get a friend to help you steady the car hood while you hammer out the bend. Your hammer hits will be more accurate when the hood is stable.
- You can also use a metalworking hammer or dolly to hammer out the bend.
- Photo Credit Jupiterimages/Comstock/Getty Images
How to Remove a Dent Off a Hood
Dented hoods are notoriously hard to fix--even for professional body shops-- because they don't always return to original condition. If you're to...
How to Replace a Car Hood
If you have gotten into a front-end collision or would like to upgrade your hood to one that is lighter or one...
How to Open a Car Hood If the Latch Is Broken
The hood latch on any car is used to connect the hood release cable to the hood locking mechanism. If it breaks...
My Car Hood Won't Open
Opening the hood of your car is easy if the latch and latch cable work. If not, you can run into headaches...
How to Align a Car Hood
Replacing and installing a new hood on your car is not easy because of the awkward size and shape of the hood....
Step-by-Step Car Hood Repair
Most car owners can repair a car hood in an afternoon with the right tools, patience, and technique. If your hood has...
How to Repair an S-10 Hood Latch
The hood latch on your Chevy S-10 is comprised of two parts. The bottom half is the stationary latch. It is mounted...
What Are the Signs of a Bent Car Frame?
When buying a used car, there are some important things to check first. One of these things is damage to the frame...