How to Replace American Standard Kitchen Faucet Cartridges

Save

American Standard faucets encounter leaks and other issues, such as poor water control, due to the cartridge inside the faucet head. This part contains many valves and when these valves wear, leaks form and the faucet does not operate as it should. Replacing this cartridge is the only way to fix the problem. Luckily, it is a project that the average homeowner will be able to tackle. Just a little know-how and some basic concepts are all there is to master.

Things You'll Need

  • Allen wrench
  • Pliers (optional)
  • Shut off the water valves under the sink to stop water flow to the faucet.

  • Remove the set screw on the handle with an Allen wrench. This is located on the front near the base of the handle. Slide off the handle once the screw is out.

  • Slide the cartridge cover off the base of the faucet. This comes right off once the handle is removed. Loosen the three screws securing the faucet to the base with an Allen wrench.

  • Remove the cartridge itself by pulling it up and off the base of the faucet. It may be necessary to remove the three O rings by hand as well if they remain in the faucet after the cartridge is removed.

  • Replace the O rings with new ones and then slide the new cartridge into place on the faucet. Tighten the three cartridge screws to secure it, and slide the cover over the cartridge. Press it into place over the base piece below the cartridge. If your cartridge uses an adapter on the stem, replace this after sliding the cartridge cover into place.

  • Slide the handle on the cartridge cover and tighten the set screw with an Allen wrench.

References

Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!