How to Set a Petsafe Fence Collar

Save

Before you start using a Petsafe receiver collar, you must set the static correction level. The collar is already set up to beep. However, the static correction (shock affect) is not set up. The collar can be set to beep only, or to give a low, medium or a high static correction. Try different levels, starting with the lowest static setting, to find one that is right for your dog.

Things You'll Need

  • Quarter (coin)
  • Use a quarter to remove the cover on the static control located on top of the transmitter. The transmitter is the black box on the collar that has two prongs. Insert the coin in the slot and turn counter-clockwise.

  • Press the correction level button with your finger and release. The LCD light on the receiver will light up and flash. Count the number of flashes, which will tell you the static level. Use the table below to set the static level according to your dog personality and energy level. If you have a timid dog, level 1 may work the best, but if your dog is hyperactive, a higher setting around five or six may be necessary.

    One flash is level 1--beep only with no static correction

    Two flashes is level 2--low static correction, timid dog

    Three flashes is level 3--medium to low static correction, for timid or average dog

    Four flashes is level 4--medium static correction, for average-energy dog

    Five flashes is level 5--medium to high static correction, for average to high-energy dog

    Six flashes is level 6--high static correction, for high-energy dog.

  • Use your finger to turn the static button. Count the flashes. To change the level, wait five seconds before turning again. Continue turning until you have the correct level for your dog.

  • Replace the cover after setting the static level that will work with your dog.

Tips & Warnings

  • An old dog that doesn't run often may only need level 1 or 2.
  • Dogs that tend to run at full speed may need a higher setting to stop him before the boundary.
  • Be careful when setting the static level for your dog. Do not start high and go down; begin low and move up.

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Use a PetSafe Correction Collar

    There are three main types of bark collars on the market. There are spray collars which sprays a burst of citronella, lemon,...

  • Petsafe Wireless Fence Instructions

    Invisible boundary fences have become a popular alternative to chain-link yard fences for keeping the family dog within the property line. Petsafe...

  • How to Program a Pet Stop Collar

    Pet Stop receiver collars are components of underground fence systems. The collars adjust incrementally to increase or decrease collar stimulation levels.

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!