How to Thread a Bobbin on a Sew E-Z Machine

Save

Threading a bobbin in particular can be intimidating, especially if you are new to sewing. Mastering the process of threading the bobbin on a Sew E-Z is a relatively straightforward process, and with practice can help you shorten the amount of time it takes to get from pattern to finished product.

Things You'll Need

  • Full bobbin
  • Sew E-Z machine
  • Push the bobbin-cover-plate release button on the back of the machine to pop up the edge of the bobbin cover.

  • Remove the bobbin cover located to the right of the needle/foot of the machine.

  • Place a new bobbin in the bobbin compartment. Make sure the thread of the bobbin is pulling counterclockwise.

  • Turn the hand wheel toward you to make the needle go down into the needle plate. This will bring the end of the bobbin thread up through the needle plate.

  • Grab the end of the bobbin thread and the needle thread and pull a few inches of thread toward the back of the machine.

  • Replace the bobbin cover and snap into place.

Tips & Warnings

  • Be certain your needle is threaded before attempting to thread the bobbin.
  • Make sure to test your newly threaded machine on scrap material before you begin sewing your actual project.
  • Be careful when you are turning the hand wheel that no part of your body or clothing is underneath the needle.

References

  • White Sewing Company Model W338 "Sew E-Z" Instruction
  • Photo Credit bobbins image by Alison Bowden from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!