How to Remove the Fuel Tank on a Honda 300 4x4 ATV


The fuel tank on a Honda TRX 300 4x4 is located in front of the seat, underneath the plastic body panels. The plastic body panels are secured to the frame of the Honda ATV by bolts. To access and remove the fuel tank, remove only the front panels and the four bolts that secure the front panels to the frame. Honda usually uses an 11 mm bolt, but that can change between models.

Things You'll Need

  • Ratchet set
  • Five-gallon bucket
  • Needle nose pliers
  • Remove the four bolts securing the front right and left body panels to the frame. The bolts will be in clear view along the edge of the panel. Use the ratchet and corresponding sized socket from the ratchet set to remove the bolts.

  • Pull the front right and left body panels off the frame of the Honda. Turn the gas valve between the fuel tank and the carburetor to the "Off" position.

  • Place the five-gallon bucket under the carburetor. Using pliers, compress the small metal clamp that secures the fuel hose to the top of the carburetor. Pull the hose off of the carburetor and drain the fuel into a bucket.

  • Using a ratchet set, remove the two bolts securing the fuel tank to the frame at the top of the fuel tank. Pull the fuel tank off the frame of the Honda ATV.

Related Searches


  • "ATVs: Everything You Need to Know (Everything You Need to Know);" Steve Casper; 2006
Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!