How to Clean Up Fiberglass Insulation

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
It is important to wear the proper clothing when removing and cleaning up fiberglass insulation.

Fiberglass insulation not only keeps wind, heat and cold from entering your home, the material also keeps heat and air conditioning from escaping from your home also. Fiberglass insulation is available in rolls and in pieces for blowing into small spaces. The material is made from fibers of glass and these fibers are unhealthy to inhale. When cleaning up fiberglass insulation, it is important to wear the proper gear so you don't get the substance on your hands, in your eyes and in your lungs and that you dispose of the material properly.

Advertisement

Step 1

Put on a long-sleeve shirt, long pants and work gloves to keep the fiberglass insulation off your skin. Put on a full-face respirator or half-face respirator with a HEPA cartridge to keep the insulation out of your lungs, and work boots or shoes.

Video of the Day

Step 2

Wet the insulation, if possible, with a water hose to keep the fiberglass dust to a minimum. Slowly start pulling the insulation from the walls, floor or ceiling of the structure you are removing it from. If you are working in an environment where you can't wet the insulation, work in sections pulling the insulation from the area.

Advertisement

Step 3

Place the insulation in plastic trash bags. Tie the bags closed with a twist tie or rope. If removing blown-in insulation, use a HEPA or ULPA vacuum cleaner only, available at equipment rental services and home improvement centers, to suck the insulation out of the wall or cavity it is in. Regular vacuum cleaners will only blow the fiberglass fragments throughout the structure you are working in.

Advertisement

Step 4

Sweep any small fiberglass fragments with a stiff broom onto a dust pan. Dispose of the fragments in a trash bag. Close the bag and tie it with a twist tie or rope. If using a vacuum cleaner to remove the small fragments, again, use a HEPA or ULPA vacuum cleaner.

Step 5

Remove the bags from the structure you are working in through a window or door. You do not want to track fiberglass fragments through an area that is clean or where pets or children are.

Step 6

Take the bags of fiberglass insulation to a landfill, if your area's trash pickup doesn't accept building supplies, or recycling facility.

Video of the Day

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...