How to Calculate Orifice Size

An orifice will increase the fluid velocity in a pipe line.
••• Thinkstock/Comstock/Getty Images

When creating a piping system, it's important to know how large your restrictive device, or orifice, should be because it determines the appropriate pressure level and flow rate of the system. There are a few reasons why you might want to install an orifice, which include increasing the line pressure and decreasing the flow through the line. You can calculate the orifice size using a formula, but you will need to know a few key numbers before you begin.

    Write down the flow of the liquid that will be going through the piping system in cubic feet per second. For example, the flow of the liquid in a system might be 8 cubic feet per second.

    Write down the velocity of the liquid flowing through the piping system in feet per second. The velocity of the liquid in the system described in Step 1 might be 2 feet per second, for example.

    Divide the flow of the liquid by the velocity of the liquid to determine the area of the orifice in square feet. In the above example, you would divide 8 by 2. The total area of the orifice would be 4 square feet.

Related Articles

How to Calculate CFM to MPH
How to Size Pressure Relief Valves
How to Convert mm Hg to in Hg
How to Calculate Airflow With Dust Extraction
How to Calculate Critical Velocity
How to Calculate 3-Phase Line-To-Ground Voltage
How to Calculate Three Phase Amperage
Volume Vs. Mass Density
How to Convert PSI to Horsepower
How to Calculate the Beta Ratio of a Flow Orifice
How to Convert Differential Pressure to Flow
How to Calculate Extruder Throughput
How to Figure GPM Water Flow on an Existing Chiller
How to Calculate Liters
How to Calculate Viscosity
How to Calculate Duct Airflow
How to Convert Gallons, Quarts, Pints and Cups
How to Calculate Hydraulic Cylinder Tonnage
Importance of Boyle's Gas Law in Daily Life

Dont Go!

We Have More Great Sciencing Articles!