How to Attach a Rear License Plate on a Passat Wagon
VW Passat Wagon models have a license plate bay on the rear door of the vehicle. All models come with at least two screw holes for attaching a plate. Some models may come with two additional screw holes to attach the bottom of the license plate to the vehicle. A license plate can be attached to the rear of a VW Passat without or without a license plate holder.
Other People Are Reading
Instructions
-
-
1
Unscrew the license plate and/or plate holder from the front of the vehicle. The license plate and/or holder is held in place by at least two screws. Use a Philips screwdriver to unscrew the plate from the bumper.
-
2
Slide the new license plate into the license plate holder. If not using a license plate holder, skip to step 3.
-
-
3
Line the license plate or holder up to the screw holes on the rear of VW Passat Wagon door.
-
4
Insert a screw through the license plate or holder into each hole on the VW Passat rear door. Tighten the screws in place with the Philips screwdriver.
-
1
References
- Photo Credit ky license plate image by timur1970 from Fotolia.com
