How to Program a Viewsat 2000 Extreme
The Viewsat 2000 Extreme is a satellite receiver designed to receive free-to-air programming. It is offered in the United States and Canada without a subscription. The Viewsat 2000 is a thin, sleek unit that allows users to receive programming from up to two satellites at once, with no limitations on the number of channels that they can receive. Setup and installation of the Viewsat is a straightforward process that is similar to setting up a cable box. However, the Viewsat unit must be configured before it can receive programming.
Other People Are Reading
Instructions
-
-
1
Press the "Power" button, which is located on the back of the device, to turn the Viewsat 2000 on.
-
2
Press the "Menu" button located in the center of the Viewsat 2000 remote control.
-
-
3
Press the "up" arrow button until you highlight the "Installation" option. Press the "Select" button. The installation menu will load.
-
4
Press the arrow button until you highlight the "Antenna Setup" option, and then press "Select." A list of available satellites appears.
-
5
Press the arrow button to highlight an available satellite from the on-screen list. Press "Select" on the remote, and then press "Exit."
-
6
Press the "Menu" button by highlighting it with the arrow keys. Enter the "Installation" menu.
-
7
Press the arrow button until you highlight the "Automatic Scan" option. Press the "Select" button. The Viewsat 2000 Extreme unit will report back to you regarding how many channels are available within one minute. Press "OK" on the remote control.
-
1
Tips & Warnings
The satellites that offer free-to-air programming offer a different selection of channels. Try each available satellite to get a sense of what programming you have available to you.
