How to Add Keyless Entry to a 2008 Nissan Sentra
Adding keyless entry to your 2008 Nissan Sentra will make getting into and out of the vehicle much more convenient. A keyless remote also serves as a safety device that lets you get in your car quicker in an emergency. Keyless entry remotes are made with safety in mind--the proof of this is the panic button on the remote. The panic button is designed to scare off predators by causing the lights on your car to flash while also sounding an alarm. You can add keyless entry to your 2008 Sentra in a few steps.
Other People Are Reading
Instructions
-
-
1
Close and lock all the doors on your 2008 Nissan Sentra using the driver's side automatic lock switch. Insert the key into the ignition and remove it a total of 6 times in less than 10 seconds. Finish with the key out of the ignition. The hazard lights flash when done correctly.
-
2
Insert the key into the ignition and turn it to the "ACC" position. Within 5 seconds, press any key on the keyless entry pad. To add another remote, press any button on it within 5 seconds of programming the previous remote. The hazard lights flash when the remote is programmed. Do not press the button more than once or the programming process will end.
-
-
3
Turn the key to the "Off" position. Remove the key from the ignition. Use the driver's side power lock switch to unlock all the doors and exit through the driver side door.
-
1
