How to Connect a Zoom Modem

Ethernet cables are necessary for Internet access.

The Zoom modem can work with all types of Internet Service Providers (ISPs). Whether you have Embarq, Comcast or Charter, you can hook up a Zoom modem and surf the web as usual. This modem can also work with a router to provide wireless Internet. Usually, the cable company does not require any pre-registration when you connect a third-party modem, but contact your ISP company if you have problems.

Things You'll Need

• Ethernet cable
• Coaxial cable

Instructions

1. Turn off your computer.

2. Plug in the Ethernet cable to the empty port on your computer. Plug the other end into the "Ethernet" port on your Zoom modem.

3. Screw in a coaxial cable into the wall cable jack and screw the other end into the modem's coaxial port.

4. Plug in your Zoom modem to an outlet to power it on. Wait five minutes for the modem to receive data from the wall connection. All of the lights on the display should show a green light, except for the "LINK" light.

5. Power on your computer. Wait for the "LINK" light to turn on before you try to browse the Internet.

6. Open a browser window and start surfing the web. If you cannot surf the web, call your cable provider to finish the setup procedure.

References

• Cable One: Zoom Cable Modem pg. 5

Resources

• Zoom: Broadband and Beyond