How do I Install Rake Trim?


Rake trim is a long piece of metal with grooves on the edges and is used to trim and cover the fascia ends of rake roofing boards. These metal trim pieces are easy to install and it takes almost no time to get the job done. You can do it by yourself, but it is easier and safer to have a friend standing by to lend a hand. The trim is used to protect the roof under the new roofing boards and to cover the raw edges of the boards.

Things You'll Need

  • Prerolled rake trim
  • Ladder
  • Hex screws
  • Power drill
  • Rubber gaskets
  • Lay all of the prerolled rake trim pieces on the ground directly below the portion of the roof where each piece will be installed.

  • Climb a ladder and have a friend pass you the first rake trim piece. Hook the lock along the top edge of the trim onto the outermost edge of the rake board installed on your roof.

  • Hold the rake trim flat against the fascia and drill through the trim with hex screws and a power drill. Insert rubber gaskets between the screws and the trim to make seals and protect the trim from damage.

  • Space the screws roughly 10 inches apart. If you cannot evenly space the screws with a 10-inch gap, move the screws 1 or 2 inches closer together or farther away for a somewhat symmetrical finish.

  • Attach each of the rake trim pieces in the same way until they are installed on your roof.

Tips & Warnings

  • You can insert the screws along the edge of the lock that grabs onto the end of the rake boards on the roof for more security.
  • Do not perform any work on your roof unless it is solid and meets local zoning and safety laws.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Install Staircase Skirt Board

    How to Install Staircase Skirt Board. Installing a skirt board on a staircase requires some time and preparation to do properly. You...

  • How to Install & Apply Stucco to a Backer Board

    Stucco is a mortarlike coating applied to a house’s exterior to create a strong, long-lasting, weather-resistant coating that can be painted or...

  • How to Apply a Metal Roof

    Installing a metal roof on your home requires a few tried-and-true techniques that have been developed by the roofing construction industry. However,...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!