How to Troubleshoot the Bissell Pro Heat 2X
Featuring a built-in heater and ten rows of dirt-removing brushes, the Bissell ProHeat 2X Deep Cleaner is a 12-amp cleaner for your carpets, upholstery and car. If you run into a problem with your ProHeat 2X, try some troubleshooting steps at home before calling in unnecessary or costly repairs. For more serious maintenance issues with your ProHeat 2X, contact Bissell's customer service team via email or phone for warranty information or Bissell-authorized service center locations in your area. Does this Spark an idea?
Instructions
-
-
1
Turn the power and heater switches to the "on" position to illuminate the heater ready light. The ProHeat 2X may be used without the heater element, but the cleaning capacity may not be as strong.
-
2
Fill the ProHeat 2X bladder with hot water and the formula tank with Bissell Fiber Cleansing Formula. Cool water or non-Bissell brand cleansers will decrease the ProHeat 2X's cleaning power.
-
-
3
Turn the ProHeat 2X's power button to the "off" position. Turn the power back to the "on" position and wait one minute. Depress the spray trigger button to prime the water tank's pump.
-
4
Replace or re-align the interior brushes by turning the HeatPro 2X's power switch to the "off" position and unpluging the electric cord from the wall outlet. Take off the water and formula tanks and unscrew the front nozzle. Set all three aside. Turn the vacuum on its side with the cord side down. Unscrew the two black screws on the clear-end cap, being careful not to drop the black screws into the vacuum. Unscrew the silver screw and gently lift up the pivot arm. Re-align or replace the interior brushes by hand. Re-assemble the vacuum to test.
-
5
Set the Ready-Tool dial to the correct setting specifications, such as the floor-cleaning mode or the tools setting.
-
1
Tips & Warnings
Always empty, rinse and dry the HeatPro 2X water tank after each use to prolong the life of the unit. All of the parts should be dried before re-attaching to the vacuum for storage.
Always turn the power switch the to the "off" position and unplug the steamer and before servicing any of the interior parts.
References
Resources
More Like This
Comments
View all 11 Comments-
Wow! What a waste of money. I haven't used it that much and the water won't heat up. Also the attachment hose will not spray. I tried calling the help line, but I had trouble understanding the operator.
-
I have the same problem it will not spray.
-
This is the very last cleaner I buy from you. I've three now, I guess you would think I would learned by now. They should last more then 12 months at least.
-
Same problem here will not spray water bought it in April can I take it back a lot of money for 3 times using the cleaner.
-
Glad it's not just you...seems like a design problem.
