An arm rail on a bar is a classic look that also has an important function. Installing your own arm rails can save you the cost of hiring a professional. Oak is a good choice the rails because it is a durable hardwood that should stand the test of time. Break up the look of the arm rail with short lengths on the front of the bar with lots of shiny metal brackets, or make one continuous arm rail.
Things You'll Need
- 2-inch oak rod
- Miter saw
- 100-grit sandpaper
- Clear coat
- Chalk box
- 2-inch end cap brackets with screws
- 2-inch arm rail brackets with screws
- Variable speed drill
- 1/16-inch drill bit
- Philips screw tip
Measure the distance from one end of the bar to the desired end of the arm rail. Saw the 2-inch rod to the desired length with a miter saw. Sand the rod smooth with 100-grit sandpaper and apply stain or clear coat to your liking.
Measure down from the top of the bar and make a mark representing the top of the arm-rail bracket. Do the same at the other end of the bar. Ask a helper to hold the end of the chalk-box string on the first mark while you stretch the string over to the second mark. Pull the string tight and pop a chalk line on the front of the bar.
Make a mark on the line representing the center of a bracket-mounting plate while holding an end-cap bracket on the chalk line. Measure down the line and make marks every 4 feet. This indicates the centers of the mounting plates at all points between the end-cap brackets.
Hold the top of the brackets against the chalk line and center a mounting plate with the marks on the chalk line that indicate where the center of the plate should be. Mark the screw holes onto the bar. Drill 1/16-inch pilot holes in the circles representing the screw holes.
Align the screw holes in the brackets with the pilot holes in the bar while you hold a bracket against the front of the bar. Secure the brackets to the bar with the supplied screws. Repeat this for the rest of the brackets except one end-cap bracket.
Slip the arm rod through the brackets, starting at the end of the bar that doesn't yet have an end cap. Feed the rod through each of the brackets until it reaches the installed end cap bracket. Slip the remaining end cap bracket over the end of the rod and secure it to the bar with the screws provided.
Tips & Warnings
- Install an elbow fitting on the rods if the arm rail turns a corner.
- Use proper ventilation when applying a finish to wood.
- Photo Credit Comstock/Comstock/Getty Images
- How to Build a Bar Armrest
How to Make a Flatbar Grind Rail for Skateboarding
One of the best pieces of equipment to help a skateboarder develop and perfect their grind techniques is to have their very...
How to Build a Skateboard Flat Bar Rail
Making your own skateboard flat bar rail is a simple and affordable project. A rail 6 feet long and 10 inches high...
How to Build a Foot Rail on a Bar
Adding a foot rail to a bar can instantly transform the look and feel of your home bar, giving it more of...
Design Ideas for Deck Rail Seating
The railing and seating are two of the most important parts of any deck. Deck railing provides safety and security while adding...
DIY Wood Bar Rails
A wood bar rail is the piece of wood that stretches along the outer edge of the bar top. It is often...