How to Change the Shocks in a Jeep Wrangler

The shocks in your Jeep Wrangler should be replaced often to avoid a jarring ride.

The shocks in your Jeep Wrangler should be replaced every 75,000 miles. Shocks eventually wear out, producing a bumpy ride. Shocks attach the axle to the frame of the vehicle and smooth out the imperfections in the road surface. They do not support the weight of the vehicle. They work in conjunction with the springs to make up the suspension system. Many aftermarket shocks are available for your Jeep Wrangler and can be purchased from any auto parts store.

Things You'll Need

• Lug nut wrench
• Hydraulic jack
• Socket set
• Ratchet

Instructions

1. Loosen the lug nuts from one tire using a lug nut wrench.

2. Place a hydraulic jack directly under the axle near the tire. Lift the vehicle with the jack high enough to remove the tire. Remove the lug nuts and pull the tire from the axle hub.

3. Remove the bolts that secure the shocks to the frame and axle using a ratchet and socket. Retain the hardware for installation of the replacement shocks.

4. Remove the shock from the vehicle.

5. Place the new shock into position between the brackets. Install the bolts and tighten them using a ratchet and socket.

6. Replace the tire and tighten the lug nuts. Lower the vehicle to the ground.

7. Repeat these steps with the other three shocks.

References

• 4x4xplor.com: Write-Up and Installation