How to Drill Holes in Old Concrete


Concrete is harder than wood, and it often gets harder with age. If you need to drill a hole for an anchor bolt in old concrete, you can't use the same kind of drill bit you would use for wood. Masonry bits aren't as sharp as wood-boring bits, but they can withstand the high temperatures generated by friction. Even with the proper bit, though, drilling through old concrete is hard with a conventional drill. A hammer drill or rotary hammer will give the extra impetus you need.

Things You'll Need

  • Hammer drill
  • Rotary hammer
  • Masonry bit
  • Water
  • Safety glasses
  • Insert a masonry bit into the chuck of a hammer drill or a rotary hammer. A hammer drill works by percussive action, while a rotary hammer has a reciprocating mechanism that moves the tip back and forth when you drill. Choose a bit that has the same diameter as the bolt or anchor you need to fit in the hole. Tighten the chuck with the key that is supplied with the drill.

  • Mark the location of the hole, then place the tip of the bit on the mark and pull the trigger to start the drill. Hold the drill steady so the tip doesn't wander as the bit begins to form the hole.

  • Drill the hole in about 1/4-inch increments, removing the bit after the completion of each and dipping it in a pan of water to cool it. The drilling will proceed more quickly if you blow the dust out of the hole periodically. Continue drilling until the depth of the hole is sufficient to accommodate the bolt or anchor.

  • Push on a hammer drill to make it work its way more quickly through the concrete. If you are using a rotary hammer, though, just let the machine do the work. If you push on it, it will work more slowly and the bit will wear out more quickly.

  • Set the drill speed to a lower setting if you are drilling through concrete that chips easily.

Tips & Warnings

  • You can buy a rotary hammer that also functions as a hammer drill. The rotary hammer setting is best for drilling holes, while the hammer drill works best for chipping and other demolition procedures.
  • Wear safety glasses when drilling through concrete. The drill produces high-speed projectiles that can seriously damage your eyes.

Related Searches


  • Photo Credit concrete image by Empath from
Promoted By Zergnet


You May Also Like

  • How to Use a Paddle Wood Drill Bit

    Paddle bits have a unique character all their own. However, mastering their use is quite another story. If not used properly, they...

  • How to Drill a Hole in Concrete

    Some construction projects require drilling a hole in concrete. Holes are made in concrete for various reasons. Most are used to secure...

  • How to Repair Pitted Concrete

    Stress, exposure to the elements and salt all wreak havoc on concrete over time. Concrete is not infallible, and pitting is one...

  • How to Drill Into a Cement Patio

    Drilling into a cement patio requires different tools than drilling into metal or wood. Standard drill bits will not cut through cured...

  • How to Drill Through Metal & Concrete

    Drilling holes into a surface is typically needed to secure a screw or a bolt when attaching a bracket or some other...

  • Why Use a Hammer Drill?

    Learn why you would need to use a hammer drill in this free power tools video.

  • Guide to Drilling Holes in Concrete

    Drilling holes in concrete requires drills and drill bits designed specifically for use in masonry. With the proper drilling tool and drill...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!