How to Replace a Signal Light in a Chevy Venture

When the turn signal on your Chevy Venture begins blinking at a rapid pace, it needs replacing. It will only do this when you are attempting to use the directional blinker on the side of the nonfunctional bulb.

Things You'll Need

• Replacement bulb

Instructions

1. Remove parking light assembly by turning the thumbscrew, holding it in place. The screw is under the hood, near the front corners.

2. Remove the parking bulb from the assembly.

3. Press the tab on the bulb socket, and turn counter-clockwise to remove the bulb.

4. Install the new bulb, and return it to the parking light assembly.

5. Replace the parking light assembly to fender, and fasten with thumbscrew.

References

• GM Extended Warranty: 2005 Chevy Venture Owner's Manual