How To Put the Cover Back on a SnugRide Car Seat

A SnugRide car seat is an infant car seat manufactured by Graco. A car seat is necessary to secure an infant in place during a car ride and protect the infant in the event of an accident. The car seat cover or fabric placed around the plastic car seat shell can be removed to be washed. Once washed and dried, the cover needs to be replaced. Never use a car seat without the cover.

Instructions

1. Wrap the bottom edge of the seat cover around the foot end of the SnugRide car seat.

2. Wrap the top edge of the seat cover around the head end of the SnugRide car seat.

3. Pull the elastic strap from the top left-hand portion of the seat cover around the handle to connect it to the hook on the bottom portion of the seat cover. Repeat this process on the right-hand side.

4. Feed the two harness buckles and belts through the shell slots, bringing them from the back of the car seat to the front. Continue feeding them through the slots on the car seat cover.

5. Feed the harness tongue from the back of the unit through the bottom slot of the car seat. Continue feeding it until it is through the car seat cover.

References

• Graco: Infant Restraint/Carrier Owner's Manual