How to Setup a Philips 60PP9202 for HDTV

The Phillips 60PP9202 HDTV is capable of displaying up to a 1080i high-definition signal. Unlike other HDTVs, however, the 60PP9202 has component video as its only HD video input. In order to view HDTV, you also need a HDTV source such as a HDTV cable box or a HDTV tuner. With either option, a digital signal is broadcast in high-definition. The HDTV tuner is required if you want to view over-the-air broadcasts.

Things You'll Need

• HDTV antenna
• HDTV tuner
• HDTV cable box
• Component cables
• Coaxial cable

Instructions

1. Connect the red, green and blue component cables from the "HD INPUT/AV-4" inputs to the component "video out" ports on either the cable box or the HDTV tuner. If you are using a cable box, skip down to Step 4.

2. Mount the HDTV antenna to the roof of your house for outdoor antennas or place the antenna near the TV for indoor antennas.

3. Connect a coaxial cable from the HDTV antenna to the HDTV tuner.

4. Turn on the TV, then rotate the bottom portion of the remote control down to reveal the AV button. Push the AV button until you tune to AV-4.

References

• "Phillips Rear Projection HDTV Monitor 60PP9202 Operating Manual"; Philips Consumer Electronics; 2002