How to Remove Vinyl Tile Glue From Wood Floors

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Image Credit: hikesterson/iStock/GettyImages

When purchasing a house, the biggest downfall is that you don't get to customize what's already in the home. What you see is what you get. This is especially upsetting when it involves something as important as flooring choices.

Advertisement

Not everyone has the same tastes in flooring, so if you purchase a house with tiled floor and you'd have preferred hardwood, you're stuck with the task of removing all those tiles. While the tiles may prove difficult, what will be a test of patience is the glue beneath every single tile.

Video of the Day

Video of the Day

Removing the Tiles

The first step to reaching the floorboards underneath is to remove the tiles. This will take some simple tools and a little bit of elbow grease, but it can be accomplished without the help of a professional. Depending on how easy the tiles are to pry up, you may need either a crowbar or chisel and hammer to pop the tiles off the floor. The difficulty behind removing the tiles lies with the glue that was used to hold them in place. If the glue has a very strong hold, you may even need to cut the tiles and pry them up piece by piece to get them off without damaging the flooring underneath.

Advertisement

Removing Adhesive Residue From Wood Floors

Once all the tiles are removed, you'll likely be faced with the challenge of removing adhesive residue from the wood floors. Depending on the type of glue, this might not be an easy task. Mastic and thinset, which are both commonly used, dissolve when in contact with water, although it could take 30 minutes or more. If you think the adhesive is either of these, lay wet cloths over the adhesive and wait. It should disintegrate, making it easy to wipe away and move on to the next renovation step.

Advertisement

If the glue doesn't soften, try removing it by scraping at the adhesive with a putty knife. If that doesn't work, try loosening the grip of the glue by applying heat.

The key to this trick isn't to apply the heat directly to the glue but near the glue so that it becomes soft and malleable again. Some people succeed by using a clothes iron and having it hover over the glue before attempting to scrape at it again.

Advertisement

If all else fails, run to your local hardware store. You can purchase an adhesive solvent that will break down the glue, making it easier for you to remove. Remember that the solvent is filled with various chemicals, so make sure that the area in which you need to apply it is well ventilated. Apply the solvent and let it rest for an hour before attempting to remove the glue once more.

Important Reminder

Before selecting which method you'll use to remove the tile adhesive, assess what type of flooring is beneath the tiles. If it's a beautiful hardwood floor, consider sanding the glue adhesive from the wood floor to keep it in the best condition possible. If you apply harsh chemicals or spend time scraping at the glue, it may damage the wood flooring.

Advertisement

Also, keep in mind that if your home was built in the early 1980s or before, there's a chance that asbestos could be hiding in the adhesive used to lay the tiles. A strong indicator is if the adhesive has a black and tar-like appearance. Before doing any additional removal, have the glue tested. If the results are positive, continue only under the supervision of professionals.

Advertisement

Advertisement

references

Report an Issue

screenshot of the current page

Screenshot loading...