How to Use a Suction Pump
Suction pumps are machines that create suction in order to pull material through a hose like a straw. A suction pump can be used for medical purposes to suction out material from a person's lungs or wounds, but there are also more commercially available pumps that are used for pumping water out of a boat or for less life-and-death situations. Using a suction pump isn't difficult, provided that you know what you're doing in each given situation. Does this Spark an idea?
Instructions
-
-
1
Check to make sure the suction pump works and all parts are in order. The hose should have a proper cap for the job on the end, the hose should have no cracks or leaks, and the power source should be charged. Run a diagnostic to make sure that the suction turns on and works properly. Make sure that the storage bin where the suction will pull the material to is also fixed and attached properly.
-
2
Place the suction hose into the area that you need to suction. If it's a medical suction pump, then you need to place the hose into the wound area, or if it's an industrial type pump, then place the hose into the pool that needs to be suctioned.
-
-
3
Turn on the suction once the hose is in place. Suction the area until you're sure you have all of the material out you can safely get and then remove the suction hose. You can leave the hose on if it's safe to suction the surrounding area, but if not, then turn the suction pump off before removing the hose.
-
4
Empty the suction receptacle into an appropriate place. Medical waste has to be disposed of properly, and many industrial chemicals that might be suctioned up also require proper disposal.
-
1
