How to Connect a SmartAx MT882 Modem to a Computer
The SmartAx MT882 modem was manufactured in 2005 by Huawei technologies. The modem is a replacement for its predecessor, the SpeedTouch 330 DSL modem. Like most DSL modems, the SmartAx MT882 is rather easy to set up. All of the hardware you need to connect the device to your computer came prepackaged with the device.
Other People Are Reading
Instructions
-
-
1
Insert the DSL splitter into a nearby telephone wall jack. If there is a telephone cable already connected to the wall jack, you will have to unplug it.
-
2
Plug one end of your RJ-11 telephone cable into the "Modem" port of the DSL splitter. Connect the other end of the telephone cable to the "ADSL" port on the back of your SmartAx MT882 modem.
-
-
3
Connect your second RJ-11 telephone cable to the "Phone" port of the splitter. Connect the other end of the cable to your actual telephone.
-
4
Plug one end of the Ethernet cable into the "Ethernet" port on the back of the SmartAx device. Connect the other end to the "Ethernet" port of your computer.
-
5
Connect the AC adapter to the power port on the back of your device. Plug the adapter into a nearby electrical outlet.
-
6
Power on your computer and modem. It will take a few seconds for the lights on the modem to sync.
-
1
