How to Change Halogen Bulbs in Lamps
Although they cost more to buy, halogen bulbs provide brighter light than ordinary incandescent bulbs. They also last twice as long. Halogen bulbs' increased brightness makes them a good choice for lamps because they reduce eye strain when you are reading, according to Family Handyman. Changing a halogen bulb is not difficult, but the task does require some special care. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Screw driver
- Paper towel
- Replacement halogen bulb
Please enter your 10 digit phone number only.
A link to this article has been sent to the phone number provided.
Instructions
-
-
1
Turn the lamp off. Allow the halogen bulb to cool down for at least 10 minutes before you touch it. When they are in use, halogen bulbs become hotter than incandescent bulbs. You must allow ample time for them to cool down before you handle them.
-
2
Push the safety tempered glass toward the bulb holder so the clips let go, according to Solairco. You may have to use a screwdriver to remove screws if the lamp has them.
-
-
3
Grab the bulb firmly with a paper towel and pull it out of the holder. Grab the replacement halogen lightbulb with the paper towel. Insert it into the holder; make sure it is inserted all the way.
-
4
Replace the safety tempered glass. Set it on the clips, then push it back into place. Or, put the glass back in place and replace the screws. Throw the old halogen bulb away in the trash. You do not need to discard them in a special way, as they do not contain mercury.
-
1
Tips & Warnings
Don't touch a halogen bulb with your bare fingers. The oil from your skin will weaken the bulb.
References
- Photo Credit lampe image by Sandro Götze from Fotolia.com
