How to Make a 12-Volt Battery 24 Volts

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Get 24 volts by connecting to 12-volt batteries in series.

While you can temporarily increase a 12-volt battery to 24 volts by storing a charge and then releasing it, the effect is shortlived; once the charge is delivered, the voltage returns to 12. The best way to make a 24-volt battery is to wire two 12-volt batteries using circuitry known as series. There are two main circuits in use: series and parallel. Wiring two 12-volt batteries in series combines the voltage from each unit to double its output, thereby allowing the electric current to flow evenly through every component in the circuit. Wiring two 12-volt batteries in parallel provides longer battery life, but the output will remain 12 volts. Making a 24-volt battery from two 12-volt batteries is moderately simple if you follow a few guidelines.

Advertisement

Step 1

Connect one battery cable to the positive (+) terminal of one of your 12-volt batteries.

Video of the Day

Step 2

Connect the other end to the negative terminal (-) of the second 12-volt battery. You now have two batteries connected in series. One battery will have an unused negative (-) terminal and the other a used positive (+) terminal.

Advertisement

Step 3

Use a battery cable to connect to the unused negative (-) terminal and another to connect to the unused positive (+) terminal. Ensure that you do not allow the negative and positive cables to touch each other as your combined voltage is now 24 volts.

Step 4

Connect the other end of the negative (-) cable to the negative terminal on your power unit. When you are ready for your power unit to operate, connect the remaining cable to the positive (+) terminal of your power unit. Your batteries will produce an output of 24 volts to enable you to run your 24-volt power unit.

Video of the Day

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...