How to Frame a Round Mirror

Save

Round mirrors add a touch of Hollywood regency glam to any space, but they can look unfinished if you hang them unframed. Cutting circles from plywood may seem intimidating, but the process is pretty straightforward; a circle jig takes all the hassle out of the process. Hang your framed round mirror over your fireplace, in your powder room or over your entryway landing strip for a polished, sophisticated look.

Things You'll Need

  • Round mirror
  • Measuring tape
  • 3/4-inch plywood sheet
  • Hammer
  • 2-inch nail with a small head
  • Circle jig, small or large depending on mirror size
  • Clear epoxy glue
  • Determine the mirror's diameter by measuring across the widest part. Subtract an inch for a frame that overlaps the mirror by 1/2 inch.

  • Cut your plywood a few inches longer and wider than your final measurement. Drive a nail into the center of the plywood, over which you'll insert the circle jig's pivot point hole.

  • Mount the circle jig to your router. Your jig has a long row of holes with diameter measurements, so choose the hole that best matches your larger diameter measurement, then fit that hole over the nail in the center of the plywood.

  • Rotate the jig counterclockwise around its pivot point to cut out the circle with your router.

  • Remove your jig from the nail and reattach it to the nail at the hole that matches your shorter diameter measurement. Cut out a second, smaller circle; you now have a 3-inch-wide frame.

  • Sand the frame's edges. Paint or stain your frame, including the back, which the mirror will reflect. Allow the frame to dry before applying glue to the back 1/2 inch of your frame's inner border. Center the frame over the mirror's face and affix the frame to the mirror.

  • Allow the glue to cure for at least 24 hours.

Tips & Warnings

  • If you want to attach the frame to the front of your mirror--which will show the mirror's edges--use mirror mastic. Often you'll find mirror mastic in a cartridge you must load into a caulk gun before using. Mirror mastic won't eat away at your mirror's silvered back over time, a promise other construction adhesives can't make.
  • Wear protective gear while operating your router.

Related Searches

References

  • Photo Credit mirror door image by mark humphreys from Fotolia.com
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!