Pellet fuel saves hundreds of dollars on heating. Although you can buy stoves made specifically for burning pellet fuel, you can convert an existing wood stove to burn pellet fuel as well. Using a metal basket insert designed specifically for this purpose, you can begin to use pellet fuel immediately in your wood stove. Pellet fuel is cleaner and burns more efficiently than logs. It is made from recycled materials that otherwise would go to a landfill. Thus, using pellet fuel in your wood stove is a very green heating solution.
Things You'll Need
- Wood stove
- Pellet basket insert
- Pellet fuel
- Small shovel
- Gel fire starter
- Fireplace lighter or long matches
Clean your wood stove. Remove ashes and unconsumed wood. Remove any grates or other inserts.
Place the pellet basket insert into your cold wood stove. Make sure it sits level. Place it toward the front of the stove but ensure the door to the stove closes easily with the basket inside.
Shovel pellets into the basket until it is completely full. Level the pellets parallel to the slant of the basket bottom to help create the best fire. Some pellets will fall through the basket. Leave them where they fall.
Open the vents and flue of the wood stove fully to create airflow. Squirt some gel fire starter on top of the pellets near the front of the basket. Ignite the gel with a fireplace lighter or a long match. Close the stove door when you see the flame is established.
Adjust the vents after the top layer of pellets has caught fire to regulate the burn time and heat output. Do not stop airflow enough that the pellets create smoke.
Scrape the pellet embers to the front of the basket when about two inches remain. Open the vents to maximum. Shovel in more pellets at the back of the basket until they fall forward, touching the pellet embers and igniting. Some smoking may occur for the first few minutes. Adjust the vents to lesser airflow if desired once the smoke has cleared.
Allow the fire to go out and the stove to get cold once a day. Remove the pellet basket and sweep out all the ashes from the wood stove. Replace the basket and repeat the process to start another fire.
Tips & Warnings
- Pellet fires should not smoke. If smoke occurs, increase airflow.
- Some pellet baskets are also designed for outdoor use. You can burn pellets or small wood fires.
- In addition to fire starter gel, you can start pellet fires with fatwood or wax and wood chip starter products.
- Never start a fire in a wood stove with the flue closed.
- Never allow children or pets near fire or a hot stove.
- Do not allow ashes to build up inside the stove for more than one day.
- Do not leave fires unattended.
- Photo Credit wood burning stove image by Paula Gent from Fotolia.com
How to Make a Wood Stove Pedestal
Building a pedestal for a wood-burning stove is a relatively straightforward project that can be completed in a day, save the finish...
How to Buy Pellets for a Pellet Burning Stove
Energy conscious consumers want to depend less on utility companies as much as possible to provide energy to their home. One way...
How to Make a Wood Pellet Burner
Wood pellet heating fuels, made from lumber mill bi-products such as sawdust, are growing in popularity as an alternative energy source, due...
How to Make Leaf Pellets to Burn in a Stove
Almost any type of biomass can be used to make pellets for pellet stoves, including leaves. A pellet stove resembles an old-fashioned...
How to Install Pellet Stove & Fireplace Inserts
Using stoves that burn pellet fuel is a simple, modern way to heat your home. Burning pellet fuel not only saves you...
Why Use a Pellet Stove?
Heating a home with a pellet stove can provide effective and affordable heating to ward off the winter chill. The pellets that...