How to Replace Staples in a Xerox 7655

Modern copiers like the Xerox 7655 can cut down the amount of staplers needed in the office.

The Xerox 7655 is a digital copying, printing, faxing and scanning machine. It can copy 75 pages per minute and can be fitted with three different "finishers" to perform functions on pages after copying and printing, such as hole punching, sorting, folding and stapling.



Each finisher stapler cartridge is removed in a different yet similar way. The light production and professional finishers feature booklet stapling and have separate booklet staple cartridges. The advanced finisher does not make booklets and only has a standard staple cartridge.

Things You'll Need

• Replacement staple cartridge

Instructions

Advanced or Professional Finisher

1. Open the front door to the finisher.

2. Hold the lever of the staple cartridge marked "R1" then pull the cartridge out by its orange lever and remove it.

3. Hold the orange lever and insert the new staple cartridge until it audibly clicks.

4. Close the finisher door.

Light Production Finisher

1. Open the right cover on the finisher.

2. Lift up slightly on the staple case and slide it straight out of the finisher.

3. Remove the staple cartridge from the staple case and insert a new one.

4. Push the entire staple case back into its original position until it clicks into place.

5. Close the right cover on the finisher.

Booklet Maker

1. Open the front door of the finisher.

2. Press the levers marked "R2" and "R3" to the right and pull the assembly outward, then hold the tabs of the booklet staple cartridge and lift it out of the assembly.

3. Open a new staple cartridge and hold the tabs to insert it into the assembly until it audibly clicks into place.

4. Push the assembly back in and close the finisher door.

References

• Xerox: WorkCentre 7655/7665/7675 User Documentation