How to Program My GE Universal Remote for My Zenith Television

Save

A GE universal remote control is compatible with many different models and brands of TV sets, including Zenith televisions. Due to this fact, the GE remote can act as a replacement for the remote that was included with the Zenith TV. Before the GE universal remote can be used with any Zenith TV, however, the remote has to be programmed to the TV. Regardless of the Zenith television that you own, the GE remote's “Code Search” option successfully programs the remote.

  • Turn on the Zenith television set using the TV's remote or by pressing “Power” on the TV set.

  • Hold down the “Code Search” or “Setup” key (depending on the exact remote) on the GE remote for roughly five seconds. The light on the universal remote turns on. Release the key after the light is on.

  • Press the “TV” button found at the top of the GE remote. The previously mentioned light blinks once.

  • Press “Power” on the GE remote continuously. The remote cycles through different TV codes until the one for the Zenith TV is located. Press the button once every two seconds (up to 250 times) until the TV shuts off.

  • Press “Enter” or “Save” (depending on the remote) on the remote. The light turns off, and the code is saved.

Related Searches

References

  • Photo Credit Brand X Pictures/Brand X Pictures/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!