How Do I Mount a Radar Detector Without the Cord Hanging Down?
Radar detectors notify you when you are in range of a law enforcement officer that is monitoring the speed of traffic. You will need to do some research on the laws in your state because, in some states, radar detectors are illegal. Mounting a radar detector on your dashboard without the power cord hanging down is not difficult to do, but you will need the correct tools and knowledge of the vehicle that you are installing the radar detector in.
Other People Are Reading
Instructions
-
-
1
Remove the screws that are securing the dashboard to the frame of the vehicle, using the screwdriver. The screws are commonly located on the sides of the dash and on the inside of the glove box.
-
2
Pull the passenger side of the dashboard away from the frame of the vehicle enough to expose the wiring that you will be connecting the radar detector to. Connect the radar detector to the wires on the vehicle behind the dash according to the manufacturer's installation instructions.
-
-
3
Guide the radar detector up to the windshield and mount it to the windshield according to the manufacturer's mounting instructions. Replace the dashboard to its original position and tuck the radar detector wires behind the dash. Replace and tighten the screws on the dash.
-
1
