How to Fax Multiple Papers Using a Brother MFC-210C or MFC-420CN

The Brother MFC-210C and the MFC-420CN both have the ability to send fax transmissions as well as make black-and-white copies. The devices feature a flatbed scanner, allowing you to scan documents in books and other odd shapes to send in faxes or to make copies from. In order to send any faxes from either the MFC-210C or the MFC-420CN, you will need to plug a working phone line into the device's phone plug.

Instructions

1. Press the button labeled "Fax" on the device's control panel. Pull up on the device's top cover to reveal the scanning glass.

2. Place the first page of the document you wish to send facedown in the lower right corner of the scanning glass. Close the device's cover slowly so the paper stays in its spot.

3. Type the recipient's fax number into the device using the numeric keypad. Press the button labeled "Black Start" to begin the fax transmission.

4. Wait for the device to scan the first page of the document. Press the "1" on the numeric keypad to indicate you wish to scan another page.

5. Remove the first page of the document from the glass and place the second page facedown, then close the cover. Press the "Menu/Set" button to begin the scan for the second page.

6. Press "1" and switch pages until you have scanned all the document's pages. Press the "2" on the numeric keypad to fax the entire scanned document.

References

• Brother: MFC-210C and MFC-420CN User's Guide