How to Pair Jawbone Headsets

Jawbone claims its Bluetooth noise-reduction technology keeps you from shouting.

The Jawbone headset, manufactured by Aliph, is an adaptive Bluetooth headset for mobile phones. It features Noise Shield technology to improve headset performance. The manufacturer claims that the Jawbone technology will eliminate virtually all background noise from your call. Additionally, Jawbone technology adjusts speaker output so you can hear your caller as the background noise increases and decreases. The manufacturer credits a proprietary voice activity sensor which allows the Jawbone headset to distinguish your speech from other nearby sounds.

Instructions

1. Turn the Jawbone power switch to the "Off" position (the LED should not be flashing).

2. Activate your phone's Bluetooth function. Refer to your phone manufacturer's user guide for steps to turn on Bluetooth.

3. Press and hold the "Noise Shield Button" located on the end of the Jawbone headset. Keep the button depressed until the LED flashes white and red. The Jawbone is now in the pairing mode.

4. Instruct the mobile phone to search for all available Bluetooth devices.

5. Select "Jawbone" from the search results list.

6. Enter the pass key "0000" and press "OK" to pair the Jawbone headset with your mobile phone. Pairing is completed when the Jawbone emits a beep and the LED flashes white eight times.

7. Select "Yes" when prompted by the phone to connect.

Tips & Warnings

• You will only need to pair the two Bluetooth devices the first time you connect them. Subsequent connections are automatic.

• The Jawbone headset will only remain in pairing mode for 2 minutes once it has been activated. If you are unable to successfully pair the two Bluetooth devices within 2 minutes, you must start the Jawbone pairing mode again.

• When you restart a Bluetooth session and turn on power to the Jawbone, you may need to press the Jawbone "Talk Button" to reactivate pairing.

References

• Jawbone: Users Guide --- Pairing Jawbone (page 9)