How do I Put Staples in the PaperPro StockMaster 100?

The PaperPro StackMaster 100 should only be refilled with heavy duty staples.

A PaperPro StackMaster 100 is a heavy duty stapler that can staple up to 100 pages of paper at once. It features a patented internal mechanism that converts finger pressure into 70 pounds of stapling power, thus allowing for easy use. The PaperPro StackMaster 100 works with heavy duty staples. The staples need to be added before the first use and refilled as needed thereafter.

Instructions

1. Turn the PaperPro StackMaster 100 upside down. Pull the base upward to release it from the stapler. Once released, swing or rotate it away from the stapler. Place the stapler upside down on a flat surface.

2. Squeeze the release tab on the back of the loading track if it has not opened. The loading track should open once the base is pulled away from the unit; however, squeezing the release tab will manually open the loading track.

3. Insert heavy duty staples to the stapler loading track. The points of the staples should be facing upward. Push the track into the unit until it is closed and locks in place.

4. Rotate the base over the stapling unit until it clicks and locks back into place. Flip the stapler over. It is now ready for use.

References

• PaperPro: How To Load A PaperPro Stapler
• PaperPro: PaperPro StackMaster 100 Stapler