How to Replace the Flasher on a Ford F-150
by Bryan ClarkThe flashers, also called blinkers or turn signals, as well as the hazard lights on the Ford F-150 pickup truck are all controlled by one simple relay module. If you have a front or rear flasher that isn't working, chances are you need to replace a simple five-pin relay module located on your steering column. The part costs very little, and replacing it will take just a few minutes of your time.
Step 1
Use a flat-head screwdriver to gently pry the clam-shell door open. The door is located under the instrument panel on the top of the steering column between the instrument panel and the steering wheel.
Step 2
Remove the door and set it in a safe place.
Step 3
Remove the blue five-pin relay from the column by pulling it gently from the plug.
Step 4
Remove the screw from the top of the relay.
Step 5
Replace the screw on the top of the relay.
Step 6
Replace the relay with the new one (part number F65B-13350-AA). Plug the new relay in where you removed the old one.
Step 7
Close the clam-shell door by lining it up and pressing down until it snaps in place.
References
- "Ford Pick-ups 2004 thru 2006: Full-Size, F-150, 2WD and 4WD (Haynes Repair Manual)"; Ken Freund; 2007
Tips
- This process is the same regardless of your model year. The only thing that's different between models is the location of the relay.
Things You'll Need
- Flat-head screwdriver
Writer Bio
Bryan Clark has been a freelance writer since 2002. His work has appeared in "The New York Times," "USA Today" and the U.K.'s biggest paper—"The Guardian," amongst other, smaller publications.
