How to Reseal an Asphalt Driveway

Save

Over time, an asphalt driveway tends to crack and warp. Pressure exerted by the elements and the environment cause the foundations of the driveway to shift. The longer you leave the damaged unattended, the worse the situation gets. Moisture seeps into the cracks, widening them, while the freezing and thawing of ice causes the pavement to warp. While asphalt driveways offer more durability than other surfaces, such as concrete, maintenance is a requirement. You should repair and reseal your asphalt driveway in the spring, after the winter thaw and the temperature stays consistently warm.

Things You'll Need

  • Push broom
  • High-pressure water hose
  • Detergent
  • Scrub brush with a long handle
  • Sand
  • Driveway crack filler
  • Driveway patch mix
  • Trowel
  • Driveway sealer
  • Applicator brush

Prepping the Driveway for Repairs

  • Sweep your entire driveway with your push broom to remove all loose dirt and debris. You want to use a push broom, as this type of broom will provide more leverage in dislodging broken pieces of asphalt.

  • Rinse your driveway with your high-pressure water hose. You can opt to use a regular garden hose; however, a high-pressure hose proves more effective as dislodging debris firmly affixed to the surface of the asphalt, such as gum.

  • Wash your driveway by pouring detergent over areas of the driveway with stains from grease and oil, or any other stubborn stains. Use your scrub brush with the long handle to scrub those areas and clean them. Finish washing by rinsing the driveway one more time to remove all detergent residues from the surface.

Repairing the Driveway for Resealing

  • Fill in all cracks visible on your driveways surface. Fill all wide cracks with sand first, according to Mr. Fix of Cornell's True Value Hardware in Eastchester, N.Y., in his interview with Jay Romano of the New York Times. Top off those cracks with the driveway crack filler and proceed to fill in all other smaller cracks, no wider than a 1/4-inch with the filler. When you apply the filler, use your trowel to smooth out the spread.

  • Patch all holes in the driveway with your driveway patch mix according to the manufacturer's instructions. Use your trowel to fill in the holes, pack it down firmly and smooth the surface.

  • Leave the cracks and patches to settle and dry overnight.

Sealing the Driveway

  • Mix the sealer according to the instructions provided by the manufacturer. Each sealant will have its own specifications; make sure you follow the instructions closely.

  • Pour your sealant onto your asphalt driveway in sections of about 4 feet, spaced about 2 feet apart.

  • Pick up the applicator brush and spread the sealant out over the driveway, evenly. Use the squeegee side of the brush to spread the sealant and then the bristle side to work the sealant into the asphalt. Once complete, allow the sealant to dry for 24 hours before walking or driving on the driveway.

Related Searches

References

  • Photo Credit old field lighthouse 2 image by Cathy Kovarik from Fotolia.com
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Reseal My Blacktop Driveway

    Asphalt, also known as blacktop, can incur damages over time from water, extreme temperature changes, ice, chemicals, excess weight or pressure, and...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!