How to Cut & Polish Stones

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

There is more than one use for a cut and polished stone. There is also more than one way to perform the task. Stones for jewelry are cut and polished using a much gentler process than stones for larger projects such as counter tops and building homes. Cutting and polishing stones of all kinds takes a similar process to that of gemstones; the only difference is the size of the stone and the equipment needed to accommodate it.

Advertisement

Step 1

A gemstone lap saw.

Don your goggles, work gloves and face mask. Cut the stone using a rock saw. Also called a slab, trim or Faceter's saw, it is made of circular blades ingrained with diamond grit. Steel, copper or phosphorus is used to make the saw. Choose the type of saw depending on the size of the stone and the desired finished product. Slab saws are up to 16 inches in diameter and the smallest, a Faceter's saw, is 4 inches in diameter.

Advertisement

Video of the Day

Step 2

A grinder/sander/polisher for smaller stones.

Grind the rock to the desired rough shape using a grinder. A hand grinder is better-suited for larger pieces, while an all-in-one grinder/sander/polisher can eliminate some steps by utilizing the same machine. Grinding is done to shape the stones and to take off the rough edges.The grinding wheels use a slightly more fine diamond grit than in sanding. More inexpensive brands use silicon carbide wheels.

Advertisement

Step 3

Sand the stones using sandpaper, fine diamond grit paper or a belt sander. Hand sanders are also appropriate. Sanding is used for finely shaping the stones and is the final step before polishing.

Step 4

Polish the stone next by using a very fine diamond-ingrained grit. Polishing provides a mirror finish and performs the ultra-fine shaping needing for jewelry and display pieces.

Advertisement

Step 5

A lap.

Make a flat bottom on a piece to be used for jewelry by using a lap. It is a sander that sits flat. The stone is used against it to flatten out the bottom for a setting. You may have to revisit polishing, because the lap may create unwanted edges.

Video of the Day

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...