How to Cut Angles on Wood Flooring

Save

Wood flooring is a practical, popular choice for hard floors because it looks handsome while being easy to maintain. Another positive advantage of installing wood flooring is that you can put it in by yourself, with very little experience. One problem you will need to work around is the matter of non-standard angles in your room. You can easily find the degree of these angles to cut accurate, well fitting pieces of wood flooring for a professional, seamless look.

Things You'll Need

  • Long paper
  • Wood flooring
  • Scissors
  • Table saw
  • Cut a piece of paper the length and width of each of the wood flooring pieces with scissors.

  • Press one of the papers against the angle where the wood needs to fit making a sharp crease to indicate the angle.

  • Lay all of the pieces of paper on the floor, creasing the papers at the angles until you have covered the floor.

  • Cut off the excess paper above each of the creased lines on the papers. The papers should all fit against the angled portions on the walls, without any paper sticking up.

  • Lay each piece of paper on top of a piece of flooring and trace the shapes of the angled ends of the papers with a pencil. Mark the wood clearly where you need to make the angled cuts.

  • Cut each piece of wood flooring along the marked lines with a table saw. Test fit each piece after you cut it to make sure you are cutting them appropriately.

Tips & Warnings

  • Keep your paper floor plans in case you want to redo your flooring at any point in the future.
  • Do not saw more than one piece of flooring at once or you may get inaccurate cuts.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Cut Laminate Flooring at an Angle

    Laminate flooring has grown to be a very popular alternative to hardwood flooring, and modern laminates are available with textures and designs...

  • How to Pattern a Wood Floor

    Much like assembling a jigsaw puzzle, the installation of a commercial wood floor is relatively simple. The wood planks and strips are...

  • What to Use to Cut Hardwood Floors

    You can increase the value and appeal of your home by installing hardwood flooring. While hardwood flooring installations are time-consuming, the right...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!